Chemfix

Injection Resins

Complete line of chemical anchoring products with polyester, epoxy acrylate, vinylester and epoxy resins.

Chemical anchor
  • 2K
  • Low VOC
  • Epoxy
  • With styrene
  • Styrene free
  • Low loads
  • Medium loads
  • High loads
  • Polyester
  • 2K Side-by-Side
  • Low Viscosity
  • 10:1 resins
  • VOC A+
  • ETA Approved
  • C2 Seismic


  • Chemfix CHEMFIX 600 (3:1 PURE EPOXY) CHEMFIX 600 (3:1 PURE EPOXY) C2 Seismic - ETA Approved - High loads - Low VOC [+ info]
    CHEMFIX 600 (3:1 PURE EPOXY)

    CHEMFIX 600 (3:1 PURE EPOXY)

    C2 Seismic - ETA Approved - High loads - Low VOC
    A two component chemical anchoring injection system, in 3:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applicationsCHARACTERISTICS: • C2 Seismic Approval
    • Suitable for high loads featuring large diameters and deep embedment.
    • Longer working times make it suitable for large holes, and high temperatures.
    • No...
     
  • Chemfix CHEMFIX 100 (1:1 PURE EPOXY) C2 CHEMFIX 100 (1:1 PURE EPOXY) C2 C2 Seismic - ETA Approved - High loads - Low Viscosity - VOC A+ [+ info]
    CHEMFIX 100 (1:1 PURE EPOXY) C2

    CHEMFIX 100 (1:1 PURE EPOXY) C2

    C2 Seismic - ETA Approved - High loads - Low Viscosity - VOC A+
    A two component chemical anchoring injection system in 1:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications.CHARACTERISTICS: • Suitable for high loads featuring large diameters and deep embedments.
    • Longer working times make it suitable for large holes, and high temperatures.
    • No shrinkage, good for large...
     
  • Chemfix CHEMFIX 10 (1:1 PURE EPOXY) CHEMFIX 10 (1:1 PURE EPOXY) 2K Side-by-Side - Epoxy - ETA Approved [+ info]
    CHEMFIX 10 (1:1 PURE EPOXY)

    CHEMFIX 10 (1:1 PURE EPOXY)

    2K Side-by-Side - Epoxy - ETA Approved
    A two component chemical anchoring injection system in 1:1 ratio.
    A formulation derived from pure epoxy with very high bond strength,
    developed principally to anchor threaded rods and rebar into concrete    CHARACTERISTICS: • Suitable for high loads featuring large diameters and deep embedments.
    • Longer working times make it suitable for large holes, and high temperatures.
    • No shrinkage, good for large...
     
  • Chemfix CH200 (HYBRID) CH200 (HYBRID) 10:1 resins - C2 Seismic - High loads - Styrene free [+ info]
    CH200 (HYBRID)

    CH200 (HYBRID)

    10:1 resins - C2 Seismic - High loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from Styrene Free resin with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applicationCHARACTERISTICS: • Suitable for use in Seismic applications under C2.
    • Suitable for high loads within standard annulus and embedments.
    • Fast working times for early loading in time sensitive...
     
  • Chemfix CH+ MAX (VINYLESTER) CH+ MAX (VINYLESTER) ETA Approved - High loads - Styrene free [+ info]
    CH+ MAX (VINYLESTER)

    CH+ MAX (VINYLESTER)

    ETA Approved - High loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from Styrene Free resin with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applicationsCHARACTERISTICS: • Suitable for high loads within standard annulus and embedments.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in...
     
  • Chemfix VINYL ECO / EASF VINYL ECO / EASF ETA Approved - Medium loads - Styrene free - VOC A+ [+ info]
    VINYL ECO / EASF

    VINYL ECO / EASF

    ETA Approved - Medium loads - Styrene free - VOC A+
    A two component chemical anchoring injection system. A formulation derived from a Hybrid based styrene free resin with high bond strength, developed principally to anchor threaded rods into concrete. Used widely for medium to high loads.CHARACTERISTICS: • Suitable for high loads within standard annulus and embedments.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in...
     
  • Chemfix PESF TOP (POLYESTER) PESF TOP (POLYESTER) ETA Approved - Styrene free - VOC A+ [+ info]
    PESF TOP (POLYESTER)

    PESF TOP (POLYESTER)

    ETA Approved - Styrene free - VOC A+
    A two component chemical anchoring injection system. A formulation derived from polyester Styrene Free resin with high bond strength, developed principally to anchor threaded rods. Covered by ETA approval for concrete, and masonry/hollow wall installationCHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in enclosed...
     
  • Chemfix P1 (POLYESTER) P1 (POLYESTER) ETA Approved - Styrene free - VOC A+ [+ info]
    P1 (POLYESTER)

    P1 (POLYESTER)

    ETA Approved - Styrene free - VOC A+
    A two component chemical anchoring injection system. A formulation derived from polyester Styrene Free resin with high bond strength, developed principally to anchor threaded rods. Covered by ETA approval for masonry/hollow wall installations.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in enclosed...
     
  • Chemfix ARCTIC (STYRENE FREE) ARCTIC (STYRENE FREE) ETA Approved - High loads - Medium loads - Styrene free [+ info]
    ARCTIC (STYRENE FREE)

    ARCTIC (STYRENE FREE)

    ETA Approved - High loads - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from an Styrene Free resin with high bond strength, developed principally for installations in temperatures down to -20ºCCHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • European Approval 19/0820 - Option 7 Concrete
    • Fast working times for early loading in time sensitive applications.
     
  • Chemfix TROPICAL (ALL RESINS) TROPICAL (ALL RESINS) ETA Approved - High loads - Medium loads - Styrene free [+ info]
    TROPICAL (ALL RESINS)

    TROPICAL (ALL RESINS)

    ETA Approved - High loads - Medium loads - Styrene free
    A two component chemical anchoring injection system. The Tropical formulation can be supplied in any resin type. Developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Normal working times in high temperature applications.
    • Use in extremely warm environments and fixing holes.
    •...
     
  • Chemfix E1 (STYRENE FREE) E1 (STYRENE FREE) Styrene free - VOC A+ [+ info]
    E1 (STYRENE FREE)

    E1 (STYRENE FREE)

    Styrene free - VOC A+
    A two component chemical anchoring injection system. A formulation derived from Styrene Free resin with high bond strength, developed principally to anchor threaded rods.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in enclosed...
     

 

We’d love to get to know you better.

The most important person at Chemfix is you. Tell us your concerns and we’ll be delighted to help.

Come and visit us Mill Street East, Dewsbury, West Yorkshire WF12 9BQ, UK  

Learn more +44 (0)1924 453886

  • Youtube
  • Google+
  • Twitter
  • Facebook
  • Linked In
  • Instagram

Register for our Newsletter

Get all the latest news and new product information direct from Chemfix by email. Unquestionably the quickest way to get updated!