Chemfix
  • Chemfix
  • Products
  • Chemical Anchoring

Chemical Anchoring

Product lines for use in construction and fixing. We offer solutions for professional chemical anchoring and for the repair and protection of marble and stone.



  • Chemical anchor
  • Chemfix CH200 (VINYLESTER) CH200 (VINYLESTER) 10:1 resins - C2 Seismic - High loads - Styrene free [+ info]
    CH200 (VINYLESTER)

    CH200 (VINYLESTER)

    10:1 resins - C2 Seismic - High loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from vinylester SF resin with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applicationsCHARACTERISTICS: • Suitable for use in Seismic applications under C2.
    • Suitable for high loads within standard annulus and embedments.
    • Fast working times for early loading in time sensitive...
     
  • Chemfix CH+ (VINYLESTER) CH+ (VINYLESTER) ETA Approved - High loads - Styrene free [+ info]
    CH+ (VINYLESTER)

    CH+ (VINYLESTER)

    ETA Approved - High loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from vinylester SF resin with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications.CHARACTERISTICS: • Suitable for high loads within standard annulus and embedments.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in...
     
  • Chemfix CHEMFIX 500 (PURE EPOXY) CHEMFIX 500 (PURE EPOXY) C2 Seismic - ETA Approved - High loads - Low VOC [+ info]
    CHEMFIX 500 (PURE EPOXY)

    CHEMFIX 500 (PURE EPOXY)

    C2 Seismic - ETA Approved - High loads - Low VOC
    A two component chemical anchoring injection system, in 3:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applicationsCHARACTERISTICS: • Suitable for high loads featuring large diameters and deep embedment.
    • Longer working times make it suitable for large holes, and high temperatures.
    • No shrinkage, good for large...
     
  • Chemfix CHEMFIX 100 (1:1 PURE EPOXY) CHEMFIX 100 (1:1 PURE EPOXY) ETA Approved - High loads [+ info]
    CHEMFIX 100 (1:1 PURE EPOXY)

    CHEMFIX 100 (1:1 PURE EPOXY)

    ETA Approved - High loads
    A two component chemical anchoring injection system in 1:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications.CHARACTERISTICS: • Suitable for high loads featuring large diameters and deep embedments.
    • Longer working times make it suitable for large holes, and high temperatures.
    • No shrinkage, good for large...
     
  • Chemfix PE (POLYESTER WITH STYRENE) PE (POLYESTER WITH STYRENE) ETA Approved - Low loads - With styrene [+ info]
    PE (POLYESTER WITH STYRENE)

    PE (POLYESTER WITH STYRENE)

    ETA Approved - Low loads - With styrene
    A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • Use in outdoor environments and fixing holes.
     
  • Chemfix PESF TOP (POLYESTER) PESF TOP (POLYESTER) ETA Approved - Low loads - Styrene free [+ info]
    PESF TOP (POLYESTER)

    PESF TOP (POLYESTER)

    ETA Approved - Low loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from polyester SF resin with high bond strength, developed principally to anchor threaded rods. Covered by ETA approval for concrete, and masonry/hollow wall installations.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in enclosed...
     
  • Chemfix EASF TOP (VINYLESTER ECO) EASF TOP (VINYLESTER ECO) ETA Approved - Medium loads - Styrene free [+ info]
    EASF TOP (VINYLESTER ECO)

    EASF TOP (VINYLESTER ECO)

    ETA Approved - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from epoxy acrylate SF resin with high bond strength, developed principally to anchor threaded rods into concrete. Used widely for medium to high loads.CHARACTERISTICS: • Suitable for high loads within standard annulus and embedments.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in...
     
  • Chemfix EA (EPOXY ACRYLATE WITH STYRENE) EA (EPOXY ACRYLATE WITH STYRENE) Medium loads - With styrene [+ info]
    EA (EPOXY ACRYLATE WITH STYRENE)

    EA (EPOXY ACRYLATE WITH STYRENE)

    Medium loads - With styrene
    A two component chemical anchoring injection system. A formulation derived from epoxy acrylate resin with high bond strength, developed principally to anchor threaded rods into concrete.CHARACTERISTICS: • Suitable for medium & high loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • Use in damp & wet environments and fixing...
     
  • Chemfix ARCTIC (STYRENE FREE) ARCTIC (STYRENE FREE) High loads - Medium loads - Styrene free [+ info]
    ARCTIC (STYRENE FREE)

    ARCTIC (STYRENE FREE)

    High loads - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from an SF resin with high bond strength, developed principally for installations in temperatures down to -20ºCCHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • European Approval 19/0820 - Option 7 Concrete
    • Fast working times for early loading in time sensitive applications.
     
  • Chemfix TROPICAL (ALL RESINS) TROPICAL (ALL RESINS) High loads - Medium loads - Styrene free [+ info]
    TROPICAL (ALL RESINS)

    TROPICAL (ALL RESINS)

    High loads - Medium loads - Styrene free
    A two component chemical anchoring injection system. The Tropical formulation can be supplied in any resin type. Developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Normal working times in high temperature applications.
    • Use in extremely warm environments and fixing holes.
    •...
     
  • Chemfix WINTER (POLYESTER) WINTER (POLYESTER) ETA Approved - Low VOC - Medium loads - Styrene free [+ info]
    WINTER (POLYESTER)

    WINTER (POLYESTER)

    ETA Approved - Low VOC - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from polyester SF resin with high bond strength, developed principally to anchor threaded rods into concrete, masonry and hollow wall installations. Used widely for medium loads.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in enclosed...
     
  • Chemfix METOSET LQ (LIQUID) METOSET LQ (LIQUID) 2K - Polyester - With styrene [+ info]
    METOSET LQ (LIQUID)

    METOSET LQ (LIQUID)

    2K - Polyester - With styrene
    Two-component polyester mortar to fix threaded metal elements in a concrete floor, stone or plain brick. As a liquid product it can also be used to fill cracks. Ideal to fix playground equipment and bus shelters, traffic signs, crash and noise barriers on the road. CHARACTERISTICS:

    • Fixing of metal elements...
     
  • Cartridges
  • Chemfix CHUBSEAL® FOIL BAG CARTRIDGES CHUBSEAL® FOIL BAG CARTRIDGES 10:1 resins - 2K - Foil Bag - Non Cut [+ info]
    CHUBSEAL® FOIL BAG CARTRIDGES

    CHUBSEAL® FOIL BAG CARTRIDGES

    10:1 resins - 2K - Foil Bag - Non Cut
    150 ml - 300 ml⋅ Patented CHUBSEAL® self-opening system.
    ⋅ Available in all 10:1 resin types.
    ⋅ Foil bag inside the tube is extruded using any silicone 300ml extrusion tool.
    ⋅ Available in natural colour or...
     
  • Chemfix CHUBPACK FOIL BAG CARTRIDGES CHUBPACK FOIL BAG CARTRIDGES 10:1 resins - 2K - Foil Bag [+ info]
    CHUBPACK FOIL BAG CARTRIDGES

    CHUBPACK FOIL BAG CARTRIDGES

    10:1 resins - 2K - Foil Bag
    150 ml - 300 ml⋅ CHUBPACK uses clip closure to be cut open.
    ⋅ Available in all 10:1 resin types.
    ⋅ Foil bag inside the tube is extruded using any silicone 300ml extrusion tool.
    ⋅ Available in natural colour...
     
  • Chemfix COAXIAL CARTRIDGES COAXIAL CARTRIDGES 10:1 resins - 2K Coaxial [+ info]
    COAXIAL CARTRIDGES

    COAXIAL CARTRIDGES

    10:1 resins - 2K Coaxial
    380 ml - 410 ml size⋅ Available in all 10:1 resin types.
    ⋅ Coaxial central hardener is extruded using the 380ml extrusion tool.
    ⋅ Available in natural colour or black with various cap options, please enquire.
     
  • Chemfix SIDE BY SIDE CARTRIDGES SIDE BY SIDE CARTRIDGES 10:1 resins - 2K Side-by-Side [+ info]
    SIDE BY SIDE CARTRIDGES

    SIDE BY SIDE CARTRIDGES

    10:1 resins - 2K Side-by-Side
    345 ml and 825 ml⋅ Available in all 10:1 resin types.
    ⋅ Side attached hardener is extruded using the 345ml or 825ml extrusion tool.
    ⋅ 825ml is recommended for use with the battery or pneumatic extrusion tool.
     
  • Chemfix PURE EPOXY CARTRIDGES PURE EPOXY CARTRIDGES 2K Side-by-Side - Epoxy [+ info]
    PURE EPOXY CARTRIDGES

    PURE EPOXY CARTRIDGES

    2K Side-by-Side - Epoxy
    400 ml - 600 ml ⋅ Available in all 1:1 resin types.
    ⋅ Resin inside the tube is extruded using side by side 1:1 extrusion tool.
    ⋅ Available in natural colour or black please enquire.
     
  • Chemfix CHEMFIX 500 CARTRIDGES CHEMFIX 500 CARTRIDGES 2K Side-by-Side - Epoxy [+ info]
    CHEMFIX 500 CARTRIDGES

    CHEMFIX 500 CARTRIDGES

    2K Side-by-Side - Epoxy
    385 ml - 585 ml - 1400 ml⋅ Available in 3:1 pure epoxy resin types.
    ⋅ Resin inside the tube is extruded using side by side 3:1 extrusion tool.
    ⋅ Available in natural colour or black please enquire.
     
  • Chemical anchor accessories
  • Chemfix MANUAL EXTRUSION TOOLS MANUAL EXTRUSION TOOLS Application [+ info]
    MANUAL EXTRUSION TOOLS

    MANUAL EXTRUSION TOOLS

    Application
    All Chemfix manual extrusion tools are made to a high quality and offer a number of significant benefits in design. Each tool has a smooth and comfortable trigger ratio designed to deliver a smooth but powerful force in all conditions.Each tool features i) spring tension adjustment to allow tightening of the spring trigger action ii) protection plate for vibration reduction in the vulnerable area iii) high tensile steel and protective finish.  1....
     
  • Chemfix SITE KIT CASE SITE KIT CASE Consumer good [+ info]
    SITE KIT CASE

    SITE KIT CASE

    Consumer good
    The Chemfix site kit case has been specifically designed to suit Chemfix cartridges and accessories. The kit contains everything required to complete a safe and efficient chemical anchor fixing. Ideal for on site to keep your cartridges and ancillaries safe and in one place, these custom made cases are designed from durable plastic with a snap close lid has an attractive finish. Available with six mixers, four...
     
  • Chemfix STEEL HOLE CLEANING BRUSHES STEEL HOLE CLEANING BRUSHES Application [+ info]
    STEEL HOLE CLEANING BRUSHES

    STEEL HOLE CLEANING BRUSHES

    Application
    To clean the inner hole surface before resin injection.Different diameters allow to choose the most suitable for each hole and the wood handle assures a comfortable use.
     
  • Chemfix HOLE CLEANING BLOW PUMP HOLE CLEANING BLOW PUMP Application [+ info]
    HOLE CLEANING BLOW PUMP

    HOLE CLEANING BLOW PUMP

    Application
    Especially designed for hole cleaning during installation process. With a good balance between lightness and robustness. 190mm push pump is pictured.    190mm (240x190x300mm) -( A ) : 240mm (overall) -( B ) : 190mm (Body) -( C ) : 300mm (Tube) -Pack:...
     
  • Chemfix NYLON PERFORATED SLEEVES NYLON PERFORATED SLEEVES Hollow wall accessory [+ info]
    NYLON PERFORATED SLEEVES

    NYLON PERFORATED SLEEVES

    Hollow wall accessory
    Indispensable for hollow masonry applications. Once the resin has been injected, the cap holds the fixing centered.
     
  • Chemfix MIXER NOZZLES MIXER NOZZLES For 2K [+ info]
    MIXER NOZZLES

    MIXER NOZZLES

    For 2K
    The T-Flow mixer™ is the patented mixer system from Chemfix. Other mixers can also be supplied depending upon application. The special design of interior elements mixes the two components more homogeneously. Options of mixers with hangers are designed for to retail markets.

    PATENT GB 2484694
     
  • Chemfix EXTENSION EXTENSION Application [+ info]
    EXTENSION

    EXTENSION

    Application
    To lengthen the nozzle for special applications in very deep holes.
     
  • Chemfix METAL PERFORATED SLEEVES METAL PERFORATED SLEEVES Hollow wall accessory [+ info]
    METAL PERFORATED SLEEVES

    METAL PERFORATED SLEEVES

    Hollow wall accessory
    Perforated metal sleeves are an effective way to create a fixing, where there is a hollow void, such as in many types of block and brick work. These sleeves come in 1 metre lengths, in different diameters. Resin is injected to fill the volume of the sleeve, and then forced through the perforations when the fixing rod is inserted. This distributes the resin evenly in the fixing cavity, forming a solid joint between the...
     
  • Chemfix INTERNAL THREADED SOCKET INTERNAL THREADED SOCKET Hollow wall accessory [+ info]
    INTERNAL THREADED SOCKET

    INTERNAL THREADED SOCKET

    Hollow wall accessory
    Internal threaded sockets to create a removable fixing for use with chemical anchoring resin, and very often with perforated nylon sleeves.Internal threaded sockets are designed to be used either alone, with chemical anchor resin to create a removable fixing. The threaded insert can be used with a standard thread bolt. These can be used in concrete,...
     
  • Chemfix ROUGHENING TOOL SDS MAX ROUGHENING TOOL SDS MAX Supplementary [+ info]
    ROUGHENING TOOL SDS MAX

    ROUGHENING TOOL SDS MAX

    Supplementary
    For the roughening of diamond drilled holes.
    Using an SDS-Max drilling machine.
     
  • Glass Capsules
  • Chemfix CHEMCAP CHEMCAP Polyester [+ info]
    CHEMCAP

    CHEMCAP

    Polyester
    Chemfix Chemcap (Polyester) is a sealed glass capsule unit which is designed for “Spin-in” Installation and for use with studs in solid concrete.CHARACTERISTICS: • Use in wet or dry concrete.
    • For both standard or diamond drilled holes.
    • Use with any steel variant.
    • Boxed in 6’s or 10’s to match studs.
    • Economical, fast...
     
  • Chemfix SUPERCAP SUPERCAP Vinylester [+ info]
    SUPERCAP

    SUPERCAP

    Vinylester
    Chemfix Supercap (Vinylester) is a sealed glass capsule unit which is designed for “Spin-in” Installation and for use with studs in solid concrete.CHARACTERISTICS: • Use in wet or dry concrete.
    • ETA approved option 8.
    • For both standard or diamond drilled holes.
    • Use with any steel variant. 
    • Boxed in 6’s or 10’s to match...
     
  • Point of Sale Products
  • Chemfix COUNTER TOP CARTRIDGE DISPLAY COUNTER TOP CARTRIDGE DISPLAY Point of Sale [+ info]
    COUNTER TOP CARTRIDGE DISPLAY

    COUNTER TOP CARTRIDGE DISPLAY

    Point of Sale
    Chemfix range of point of sale (POS) material and sales aids for use in store or for client visits, in plain or private label. An ideal way to make your product stand out from the shelf, and illustrate the power and uses of chemical anchoring.These lightweight displays are built from Perspex and specially made real life fixing models so that the user can look and touch. The built-in leaflet holder (option) further enhances the sales information...
     
  • Chemfix BRICK DEMO DISPLAY BRICK DEMO DISPLAY [+ info]
    BRICK DEMO DISPLAY

    BRICK DEMO DISPLAY

    Chemfix range of point of sale (POS) material and sales aids for use in store or for client visits, in plain or private label. This specially made lightweight (0.5kg) demonstration sample is an ideal way to illustrate chemical anchoring to clients.A threaded nut is included to allow any item to be attached to demonstrate specific fixing applications.
     
  • Chemfix COUNTER TOP PRE-MIX DISPLAY COUNTER TOP PRE-MIX DISPLAY [+ info]
    COUNTER TOP PRE-MIX DISPLAY

    COUNTER TOP PRE-MIX DISPLAY

    Chemfix range of point of sale (POS) material and sales aids for use in store or for client visits, in plain or private label. An ideal way to make your product stand out from the shelf, and illustrate the power and uses of Pre-Mix Wood Filler.A perspex unit with space for 2 cartidges which can be conveniently wall mounted to demonstrate the power and versatility of the Pre-Mix Two Part Wood Filler. Showing a range of repairs including edges, fixings and...
     
  • Chemfix VIDEO DISPLAY STAND VIDEO DISPLAY STAND Point of Sale [+ info]
    VIDEO DISPLAY STAND

    VIDEO DISPLAY STAND

    Point of Sale
    This point of sale product display stand is an excellent marketing tool and is available to our customers in full private label branding. These can be ordered directly from Chemfix as MINIMUM ORDER 1PCS !We are supporting the low order quantity to help support your marketing efforts.  The optional LED screen can run the video of your choice to any length and can accept a preloaded SD card or USB stick and can be...
     
  • Pneumatic & Drill Extrusion Tools
  • Chemfix PNEUMATIC EXTRUSION TOOLS PNEUMATIC EXTRUSION TOOLS UK Manufactured [+ info]
    PNEUMATIC EXTRUSION TOOLS

    PNEUMATIC EXTRUSION TOOLS

    UK Manufactured
    Manufactured in the UK by a world leading specialist in extrusion tool products, this range of tools is custom made to suit the Chemfix cartridge. Driven by a standard Pneumatic air line for effortless extrusions. CHARACTERISTICS:

    • Lightweight 1.9kg*
    • Unlimited & smooth extrusions.
    • Perfect for where airlines can provide continuous extrusions.
    • Saves time and energy.
    • 2.2kN of...
     
  • Chemfix DRILL ADAPTOR EXTRUSION TOOL DRILL ADAPTOR EXTRUSION TOOL 10:1 resins - 2K - Light [+ info]
    DRILL ADAPTOR EXTRUSION TOOL

    DRILL ADAPTOR EXTRUSION TOOL

    10:1 resins - 2K - Light
    The Drill Adaptor Extrusion Tool is a patented innovation which allows any battery operated power drill to be converted to a powerful extrusion tool for Silicone or Chemical anchoring cartridges without the need for a separate dedicated battery tool.
    These lightweight and easy to store adaptors will fit any conventional battery drill and come in three sizes:  1) The 300ml adaptors can be used with our ChubSeal or Chubpack foil bag cartridges, or a standard...
     
  • Fixings
  • Chemfix CHEMICAL ANCHOR STUDS CHEMICAL ANCHOR STUDS [+ info]
    CHEMICAL ANCHOR STUDS

    CHEMICAL ANCHOR STUDS

    Chemfix studs and sockets are designed for use with Chemcap and Supercap glass capsules. They can also be used just as easily with our standard chemical anchor resin. Zinc plated 5.8 grade steel.CHARACTERISTICS: • Use in wet or dry concrete.
    • Cut-point centre tip.
    • For both standard or diamond drilled holes.
    • Carbon or stainless steel grades available.
    • Boxed in 6's or 10's to...
     
  • Chemfix ASPHALT FIXING CHEMBOLT™ ASPHALT FIXING CHEMBOLT™ [+ info]
    ASPHALT FIXING CHEMBOLT™

    ASPHALT FIXING CHEMBOLT™

    CHEMFIX ASPHALT fixing system for use with chemical anchoring.
    A metal anchor bolt with an internal thread which is designed for removable fixings in asphalt, combined with a chemical anchor resin for high durability and ease of fixing.    Link to reseller https://www.sealantsonline.co.uk/ProductGrp/004400510001 CHARACTERISTICS: • M12 or M10 internally threaded socket.
    • Designed for use in Asphalt or Tarmac.
    • Proven durability.
     
  • Tension Testing Equipment
  • Chemfix MEDIUM DUTY KIT (25kN & 50kN) MEDIUM DUTY KIT (25kN & 50kN) [+ info]
    MEDIUM DUTY KIT (25kN & 50kN)

    MEDIUM DUTY KIT (25kN & 50kN)

    Professional Medium Duty Fixing Testers enable engineers to confirm the holding power of anchors in most construction materials, either for the purpose of establishing safe working loads or to validate the correct installation of existing fixings.INTRODUCING THE NEW 2020 "M" RANGE

    The tensile load of up to 25kN or 50kN is applied to the fixing mechanically and hydraulics are used to register the load through an accurate analogue gauge, making the...
     
  • Chemfix HEAVY DUTY KIT (145kN) HEAVY DUTY KIT (145kN) [+ info]
    HEAVY DUTY KIT (145kN)

    HEAVY DUTY KIT (145kN)

    The 145kN model 2008 tester has been designed to meet the demand for proof load testing of larger construction fixings, studs, threaded bar or rebar.INTRODUCING THE NEW 2020 "M" RANGE A lightweight triangular shape aluminium load spreading bridge has been designed specifically for the model 2008 tester and directs reaction loads away from the fixing, this combined...
     
  • Chemfix REBAR ADAPTORS REBAR ADAPTORS UK Manufactured [+ info]
    REBAR ADAPTORS

    REBAR ADAPTORS

    UK Manufactured
    These adaptors are specially made for the 145kN test unit, and allow for a standard ribbed rebar dowel to be tested using this ingenious design.
     

 

We’d love to get to know you better.

The most important person at Chemfix is you. Tell us your concerns and we’ll be delighted to help.

Come and visit us Mill Street East, Dewsbury, West Yorkshire WF12 9BQ, UK  

Learn more +44 (0)1924 453886

  • Youtube
  • Google+
  • Twitter
  • Facebook
  • Linked In
  • Instagram

Register for our Newsletter

Get all the latest news and new product information direct from Chemfix by email. Unquestionably the quickest way to get updated!