• Chemfix
  • Products

Products

The entire range of Chemfix products.



  • Metolux Fillers
  • Chemfix 2 PART PRE-MIX STYRENE FREE WOOD FILLER 2 PART PRE-MIX STYRENE FREE WOOD FILLER 2K - Low VOC - Styrene free [+ info]
    2 PART PRE-MIX STYRENE FREE WOOD FILLER

    2 PART PRE-MIX STYRENE FREE WOOD FILLER

    2K - Low VOC - Styrene free
    Metolux 2 Part Pre-Mix STYRENE FREE Wood Filler is an innovative two-part high strength wood filler designed to guarantee the perfect ratio mix of hardener and resin to provide the strongest repair possible to all kinds of materials. Pre-mix is the true DIY filler – because it can be dispensed easily with a silicone tool and automatically dispenses the correct ration of resin and hardener. The user can either work with the mixing nozzle direct to...
     
  • Chemfix 2 PART STYRENE FREE WOOD FILLER 2 PART STYRENE FREE WOOD FILLER 2K - Low VOC - Polyester - Styrene free [+ info]
    2 PART STYRENE FREE WOOD FILLER

    2 PART STYRENE FREE WOOD FILLER

    2K - Low VOC - Polyester - Styrene free
    Metolux 2 Part Styrene Free Wood Filler is a pre-coloured two-part high strength polyester wood filler supplied in retail and trade pack sizes. Supplied with a separate hardener, this wood filler provides a strong high quality repair
    to wood imperfections. Supplied in a large range of pre-coloured blends to match your wood type. Key Benefits
    •...
     
  • Chemfix 2 PART DECOR ALL PURPOSE 2 PART DECOR ALL PURPOSE 2K - Low VOC - With styrene [+ info]
    2 PART DECOR ALL PURPOSE

    2 PART DECOR ALL PURPOSE

    2K - Low VOC - With styrene
    Metolux 2 Part Universal Dec Fill is a fast hardening two-component polyester filler paste for the filling and repairing of holes and surface imperfections in a wide range of materials
    including wood, metal, concrete and GRP.
    Easy to sand and finish with minimal clogging, and
    leaves a hard ready to coat finish which can be easily blended.

    • Good Value product • Versatile use on wood (door frames, windows, screw holes,...
     
  • Chemfix 1 PART WOOD FILLER 1 PART WOOD FILLER 1K - Low VOC [+ info]
    1 PART WOOD FILLER

    1 PART WOOD FILLER

    1K - Low VOC
    Metolux 1 Part Wood Filler is a pre-coloured one part high strength polyester wood filler supplied in a handy pack size. Used for the filling and repair of small pinholes and cracks below 5mm depth.Particularly suited to flat face-up applications and for materials such as MDF and chipboard.  Fast drying in the normal atmosphere.  Key Benefits  • Creamy texture for easy application.
    • Handy pack size...
     
  • Chemfix HARDENERS FOR PUTTIES HARDENERS FOR PUTTIES [+ info]
    HARDENERS FOR PUTTIES

    HARDENERS FOR PUTTIES

    Benzoyl peroxide hardener for all 2 part Metolux Fillers (not pre-mix)
     
  • Chemfix SILICONE EXTRUSION TOOL SILICONE EXTRUSION TOOL Tool [+ info]
    SILICONE EXTRUSION TOOL

    SILICONE EXTRUSION TOOL

    Tool
    Silicone tool for use with our Metolux Pre-Mix 300g Wood Filler, or any chubseal, chubpack or silicone product. High quality powder coated extrusion tool for the 300g Pre-Mix wood filler. Geared for ease of use, for a smooth easy extrusion.
     
  • Chemfix PRE-MIX MIXERS BAGGED PRE-MIX MIXERS BAGGED [+ info]
    PRE-MIX MIXERS BAGGED

    PRE-MIX MIXERS BAGGED

    10 x Spare T-Flow™ mixers , short type with hanger For use with the Pre-Mix wood filler system
     
  • Chemfix EPO LO VIS EPO LO VIS 2K Side-by-Side - Low Viscosity - Low VOC [+ info]
    EPO LO VIS

    EPO LO VIS

    2K Side-by-Side - Low Viscosity - Low VOC
    EPO LO VIS is a two-component pure epoxy system, with high abrasion resistance, particularly used in the process of channel filling concrete floors, following the routing of heavy duty cabling, without blocking electrical pulses for communication.Used to frequently channel warehouse cable, as the resultant fill does not block electrical and magnetic communications with fork-trucks etc operating along these channels, but provides an extremely abrasion resistance...
     
  • Chemfix METOSET 10:1 METOSET 10:1 2K - Foil Bag - Polyester - Styrene free - VOC A+ [+ info]
    METOSET 10:1

    METOSET 10:1

    2K - Foil Bag - Polyester - Styrene free - VOC A+
    Metoset 10:1 is a two-component, ready to use, rapid curing, concrete repair resin used for cracks and sealing joints in almost any surface. May be applied using any standard silicone tool. This formula is for outdoor or indoor use, and is very versatile. May be applied to slightly
    damp surfaces without any preparations. Ensures a seamless repair.

    Key Benefits

    • Single unit...
     
  • Chemfix METOPOXY E POURING ADHESIVE METOPOXY E POURING ADHESIVE 2K - Adhesive - Epoxy - Low Viscosity [+ info]
    METOPOXY E POURING ADHESIVE

    METOPOXY E POURING ADHESIVE

    2K - Adhesive - Epoxy - Low Viscosity
    Metolux Metopoxy E 1.5kg is an extremely high strength pourable resin system. Provides high performance in compressive and tensile strength. Used widely for the anchoring of steel bars and the reinforcement of concrete.This product is also ideal for reinforcing and protecting hard to reach metal joints. The epoxy formula has longer working times which allows it to be used in large, deep cracks joints and fixing...
     
  • Metolux Adhesives
  • Chemfix METOFIX 3:1 BBA APPROVED METOFIX 3:1 BBA APPROVED 2K - Epoxy [+ info]
    METOFIX 3:1 BBA APPROVED

    METOFIX 3:1 BBA APPROVED

    2K - Epoxy
    This BBA APPROVED 3-1 ratio solvent free, general purpose building adhesive is designed for ‘face-up’ applications. It is designed primarily for the decorative brick industry for use on lintels, arches chimneys and brick slips.The product has a unique packaging system which houses the resin and hardener in one container, the hardener housed in the dish lid.   Key benefits Single unit packaging (resin & hardener), easy to mix and easy to...
     
  • Chemfix METOBOND 1-1 METOBOND 1-1 2K - Epoxy - Thixotropic [+ info]
    METOBOND 1-1

    METOBOND 1-1

    2K - Epoxy - Thixotropic
    General Purpose Epoxy Building Adhesive, Metolux Metobond has a thixotropic mixed consistency. It is designed predominently for vertical and overhead applications and is offered as an extremely powerful structural adhesive.Offers high chemical resistance. The product has a unique packaging system which houses the resin and hardener in one container, the hardener housed in the dish lid.  Key benefits  Single unit packaging (hardener &...
     
  • Chemical anchor
  • Chemfix POLYESTER RESIN POLYESTER RESIN ETA Approved - Low loads - With styrene [+ info]
    POLYESTER RESIN

    POLYESTER RESIN

    ETA Approved - Low loads - With styrene
    A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • Use in outdoor environments and fixing holes.  
  • Chemfix POLYESTER RESIN STYRENE FREE POLYESTER RESIN STYRENE FREE ETA Approved - Low loads - Styrene free [+ info]
    POLYESTER RESIN STYRENE FREE

    POLYESTER RESIN STYRENE FREE

    ETA Approved - Low loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods. Covered by ETA approval for concrete, and masonry/hollow wall installations.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in enclosed...
     
  • Chemfix EPOXY ACRYLATE RESIN STYRENE FREE EPOXY ACRYLATE RESIN STYRENE FREE ETA Approved - Medium loads - Styrene free [+ info]
    EPOXY ACRYLATE RESIN STYRENE FREE

    EPOXY ACRYLATE RESIN STYRENE FREE

    ETA Approved - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from epoxy acrylate resin with high bond strength, developed principally to anchor threaded rods into concrete. Used widely for medium to high loads.CHARACTERISTICS: • Suitable for high loads within standard annulus and embedments.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in...
     
  • Chemfix CH+ RESIN STYRENE FREE CH+ RESIN STYRENE FREE ETA Approved - High loads - Medium loads - Styrene free [+ info]
    CH+ RESIN STYRENE FREE

    CH+ RESIN STYRENE FREE

    ETA Approved - High loads - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from vinylester resin with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications.CHARACTERISTICS: • Suitable for high loads within standard annulus and embedments.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in...
     
  • Chemfix ARCTIC RESIN STYRENE FREE ARCTIC RESIN STYRENE FREE High loads - Medium loads - Styrene free [+ info]
    ARCTIC RESIN STYRENE FREE

    ARCTIC RESIN STYRENE FREE

    High loads - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally for installations in temperatures of up to -18ºCCHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • Use in extremely cold environments and fixing holes....
     
  • Chemfix PURE EPOXY RESIN PURE EPOXY RESIN ETA Approved - High loads [+ info]
    PURE EPOXY RESIN

    PURE EPOXY RESIN

    ETA Approved - High loads
    A two component chemical anchoring injection system in 1:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications.CHARACTERISTICS: • Suitable for high loads featuring large diameters and deep embedments.
    • Longer working times make it suitable for large holes, and high temperatures.
    • No shrinkage, good for large...
     
  • Chemfix METOSET LQ (LIQUID) METOSET LQ (LIQUID) [+ info]
    METOSET LQ (LIQUID)

    METOSET LQ (LIQUID)

    Two-component polyester mortar to fix threaded metal elements in a concrete floor, stone or plain brick. As a liquid product it can also be used to fill cracks. Ideal to fix playground equipment and bus shelters, traffic signs, crash and noise barriers on the road. CHARACTERISTICS:

    • Fixing of metal elements...
     
  • Chemfix CHEMFIX 500 CHEMFIX 500 ETA Approved - High loads - Low VOC [+ info]
    CHEMFIX 500

    CHEMFIX 500

    ETA Approved - High loads - Low VOC
    A two component chemical anchoring injection system, in 3:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applicationsCHARACTERISTICS: • Suitable for high loads featuring large diameters and deep embedment.
    • Longer working times make it suitable for large holes, and high temperatures.
    • No shrinkage, good for large...
     
  • Chemfix EPOXY ACRYLATE RESIN EPOXY ACRYLATE RESIN Medium loads - With styrene [+ info]
    EPOXY ACRYLATE RESIN

    EPOXY ACRYLATE RESIN

    Medium loads - With styrene
    A two component chemical anchoring injection system. A formulation derived from epoxy acrylate resin with high bond strength, developed principally to anchor threaded rods into concrete.CHARACTERISTICS: • Suitable for medium & high loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • Use in damp & wet environments and fixing...
     
  • Chemfix TROPICAL RESIN STYRENE FREE TROPICAL RESIN STYRENE FREE High loads - Medium loads - Styrene free [+ info]
    TROPICAL RESIN STYRENE FREE

    TROPICAL RESIN STYRENE FREE

    High loads - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from a specialist resin with high bond strength, developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Normal working times in high temperature applications.
    • Use in extremely warm environments and fixing holes.
    •...
     
  • Chemfix WINTER STYRENE FREE WINTER STYRENE FREE ETA Approved - Low VOC - Medium loads - Styrene free [+ info]
    WINTER STYRENE FREE

    WINTER STYRENE FREE

    ETA Approved - Low VOC - Medium loads - Styrene free
    A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods into concrete, masonry and hollow wall installations. Used widely for medium loads.CHARACTERISTICS: • Suitable for medium loads for non-critical applications.
    • Fast working times for early loading in time sensitive applications.
    • No styrene allows for use indoors and in enclosed...
     
  • Cartridges
  • Chemfix CHUBSEAL® FOIL BAG CARTRIDGES CHUBSEAL® FOIL BAG CARTRIDGES 10:1 resins - 2K - Foil Bag - Non Cut [+ info]
    CHUBSEAL® FOIL BAG CARTRIDGES

    CHUBSEAL® FOIL BAG CARTRIDGES

    10:1 resins - 2K - Foil Bag - Non Cut
    150 ml - 300 ml⋅ Patented CHUBSEAL® self-opening system.
    ⋅ Available in all 10:1 resin types.
    ⋅ Foil bag inside the tube is extruded using any silicone 300ml extrusion tool.
    ⋅ Available in natural colour or...
     
  • Chemfix CHUBPACK FOIL BAG CARTRIDGES CHUBPACK FOIL BAG CARTRIDGES 10:1 resins - 2K - Foil Bag [+ info]
    CHUBPACK FOIL BAG CARTRIDGES

    CHUBPACK FOIL BAG CARTRIDGES

    10:1 resins - 2K - Foil Bag
    150 ml - 300 ml⋅ CHUBPACK uses clip closure to be cut open.
    ⋅ Available in all 10:1 resin types.
    ⋅ Foil bag inside the tube is extruded using any silicone 300ml extrusion tool.
    ⋅ Available in natural colour...
     
  • Chemfix COAXIAL CARTRIDGES COAXIAL CARTRIDGES 10:1 resins - 2K Coaxial [+ info]
    COAXIAL CARTRIDGES

    COAXIAL CARTRIDGES

    10:1 resins - 2K Coaxial
    380 ml - 410 ml size⋅ Available in all 10:1 resin types.
    ⋅ Coaxial central hardener is extruded using the 380ml extrusion tool.
    ⋅ Available in natural colour or black with various cap options, please enquire.
     
  • Chemfix SIDE BY SIDE CARTRIDGES SIDE BY SIDE CARTRIDGES 10:1 resins - 2K Side-by-Side [+ info]
    SIDE BY SIDE CARTRIDGES

    SIDE BY SIDE CARTRIDGES

    10:1 resins - 2K Side-by-Side
    345 ml and 825 ml⋅ Available in all 10:1 resin types.
    ⋅ Side attached hardener is extruded using the 345ml or 825ml extrusion tool.
    ⋅ 825ml is recommended for use with the battery or pneumatic extrusion tool.
     
  • Chemfix PURE EPOXY CARTRIDGES PURE EPOXY CARTRIDGES 2K Side-by-Side - Epoxy [+ info]
    PURE EPOXY CARTRIDGES

    PURE EPOXY CARTRIDGES

    2K Side-by-Side - Epoxy
    400 ml - 600 ml ⋅ Available in all 1:1 resin types.
    ⋅ Resin inside the tube is extruded using side by side 1:1 extrusion tool.
    ⋅ Available in natural colour or black please enquire.
     
  • Chemfix CHEMFIX 500 CARTRIDGES CHEMFIX 500 CARTRIDGES 2K Side-by-Side - Epoxy [+ info]
    CHEMFIX 500 CARTRIDGES

    CHEMFIX 500 CARTRIDGES

    2K Side-by-Side - Epoxy
    385 ml - 585 ml - 1400 ml⋅ Available in 3:1 pure epoxy resin types.
    ⋅ Resin inside the tube is extruded using side by side 3:1 extrusion tool.
    ⋅ Available in natural colour or black please enquire.
     
  • Chemical anchor accessories
  • Chemfix APPLICATOR GUN APPLICATOR GUN Application [+ info]
    APPLICATOR GUN

    APPLICATOR GUN

    Application
    All Chemfix manual extrusion tools are made to a high quality and offer a number of significant benefits in design. Each tool has a smooth and comfortable trigger ratio designed to deliver a smooth but powerful force in all conditions.Each tool features i) spring tension adjustment to allow tightening of the spring trigger action ii) protection plate for vibration reduction in the vulnerable area iii) high tensile steel and protective finish.  1....
     
  • Chemfix SITE KIT CASE SITE KIT CASE Consumer good [+ info]
    SITE KIT CASE

    SITE KIT CASE

    Consumer good
    The Chemfix site kit case has been specifically designed to suit Chemfix cartridges and accessories. The kit contains everything required to complete a safe and efficient chemical anchor fixing. Ideal for on site to keep your cartridges and ancillaries safe and in one place, these custom made cases are designed from durable plastic with a snap close lid has an attractive finish. Available with six mixers, four...
     
  • Chemfix WIRE BRUSHES WIRE BRUSHES Application [+ info]
    WIRE BRUSHES

    WIRE BRUSHES

    Application
    To clean the inner hole surface before resin injection.Different diameters allow to choose the most suitable for each hole and the wood handle assures a comfortable use.
     
  • Chemfix BLOW OUT PUMP BLOW OUT PUMP Application [+ info]
    BLOW OUT PUMP

    BLOW OUT PUMP

    Application
    Especially designed for hole cleaning during installation process. With a good balance between lightness and robustness. 190mm push pump is pictured.    190mm (240x190x300mm) -( A ) : 240mm (overall) -( B ) : 190mm (Body) -( C ) : 300mm (Tube) -Pack:...
     
  • Chemfix SLEEVES SLEEVES Hollow wall accessory [+ info]
    SLEEVES

    SLEEVES

    Hollow wall accessory
    Indispensable for hollow masonry applications. Once the resin has been injected, the cap holds the fixing centered.
     
  • Chemfix MIXER NOZZLES MIXER NOZZLES For 2K [+ info]
    MIXER NOZZLES

    MIXER NOZZLES

    For 2K
    The T-Flow mixer™ is the patented mixer system from Chemfix. Other mixers can also be supplied depending upon application. The special design of interior elements mixes the two components more homogeneously. Options of mixers with hangers are designed for to retail markets.

    PATENT GB 2484694
     
  • Chemfix EXTENSION EXTENSION Application [+ info]
    EXTENSION

    EXTENSION

    Application
    To lengthen the nozzle for special applications in very deep holes.
     
  • Chemfix METAL SLEEVES METAL SLEEVES Hollow wall accessory [+ info]
    METAL SLEEVES

    METAL SLEEVES

    Hollow wall accessory
    Perforated metal sleeves are an effective way to create a fixing, where there is a hollow void, such as in many types of block and brick work. These sleeves come in 1 metre lengths, in different diameters. Resin is injected to fill the volume of the sleeve, and then forced through the perforations when the fixing rod is inserted. This distributes the resin evenly in the fixing cavity, forming a solid joint between the...
     
  • Chemfix INTERNAL THREADED SOCKET INTERNAL THREADED SOCKET Hollow wall accessory [+ info]
    INTERNAL THREADED SOCKET

    INTERNAL THREADED SOCKET

    Hollow wall accessory
    Internal threaded sockets to create a removable fixing for use with chemical anchoring resin, and very often with perforated nylon sleeves.Internal threaded sockets are designed to be used either alone, with chemical anchor resin to create a removable fixing. The threaded insert can be used with a standard thread bolt. These can be used in concrete,...
     
  • Glass Capsules
  • Chemfix CHEMCAP CHEMCAP Polyester [+ info]
    CHEMCAP

    CHEMCAP

    Polyester
    Chemfix Chemcap (Polyester) is a sealed glass capsule unit which is designed for “Spin-in” Installation and for use with studs in solid concrete.CHARACTERISTICS: • Use in wet or dry concrete.
    • For both standard or diamond drilled holes.
    • Use with any steel variant.
    • Boxed in 6’s or 10’s to match studs.
    • Economical, fast...
     
  • Chemfix SUPERCAP SUPERCAP Vinylester [+ info]
    SUPERCAP

    SUPERCAP

    Vinylester
    Chemfix Supercap (Vinylester) is a sealed glass capsule unit which is designed for “Spin-in” Installation and for use with studs in solid concrete.CHARACTERISTICS: • Use in wet or dry concrete.
    • ETA approved option 8.
    • For both standard or diamond drilled holes.
    • Use with any steel variant. 
    • Boxed in 6’s or 10’s to match...
     
  • Timbabuild Epoxy Wood Repair
  • Chemfix TIMBABUILD EHB60 TIMBABUILD EHB60 2K Side-by-Side - Epoxy - VOC A+ - Wood [+ info]
    TIMBABUILD EHB60

    TIMBABUILD EHB60

    2K Side-by-Side - Epoxy - VOC A+ - Wood
    Timbabuild® EHB60 Professional manufactured by Chemfix, is a two-part thixotropic 1:1 ratio mix solvent free, epoxy based wood filler. It is specially designed for large and extensive repairs to areas of damaged and rot affected timber. For repairs up to 60mm depth.

    Designed for both horizontal and vertical applications. It will also directly treat the timber to prevent any further occurences of decay. EHB60 Professional displays high...
     
  • Chemfix TIMBABUILD ERC10 TIMBABUILD ERC10 2K Side-by-Side - Epoxy - VOC A+ - Wood [+ info]
    TIMBABUILD ERC10

    TIMBABUILD ERC10

    2K Side-by-Side - Epoxy - VOC A+ - Wood
    Timbabuild® ERC10 manufactured by Chemfix, is a two-part solvent-free 1:1 ratio mix, epoxy based wood filler. It is specially designed for small repairs to timber which are subject to stress and impact. For repairs up to 10mm depth.

    Timbabuild® ERC10 manufactured by Chemfix, is a two-part solvent-free 1:1 ratio mix, epoxy based wood filler. It is specially designed for small repairs to timber which are...
     
  • Chemfix TIMBABUILD EWS TIMBABUILD EWS 2K - Epoxy - Liquid compound - Primer [+ info]
    TIMBABUILD EWS

    TIMBABUILD EWS

    2K - Epoxy - Liquid compound - Primer
    Timbabuild Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent free, resin solution which is designed to strengthen weakened wood fibres by penetrating deep into the wood.The product is used as a primer in conjunction with the Epoxy Rapid Cure (ERC10) or Epoxy High Build (EHB60) systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool...
     
  • Chemfix TIMBABUILD EXTRUSION TOOL TIMBABUILD EXTRUSION TOOL 2K Side-by-Side - Tool [+ info]
    TIMBABUILD EXTRUSION TOOL

    TIMBABUILD EXTRUSION TOOL

    2K Side-by-Side - Tool
    400 ml 1:1 ratio extrusion tool for easily extruding Timbabuild ERC10 or EHB60 evenly.
    Key benefits • All-protected hi-grade steel construction lightweight : 1.32kg
    • Anti-Vibration pressure plate to guard against breakage.
    • Spring Tension adjustment screw, extends working life...
     
  • Chemfix TIMBAGLAZE PUTTY REPLACEMENT TIMBAGLAZE PUTTY REPLACEMENT 1K - Glazing Sealant - Hybrid [+ info]
    TIMBAGLAZE PUTTY REPLACEMENT

    TIMBAGLAZE PUTTY REPLACEMENT

    1K - Glazing Sealant - Hybrid
    Timbabuild® Timbaglaze Putty Replacement by Chemfix, the worlds only genuine all weather use Multi-Purpose Glazing Sealant. A single component hybrid polymer specifically designed for bedding in any type of glazing unit indoors or outdoors.Suitable for most substrates, including wet substrates, does not cause corrosion on metals. The gluing and sealing mass Adhesive has good vibration and noise-suppressing properties. Adhesive is UV- and weather...
     
  • Chemfix SEALANT APPLICATOR SEALANT APPLICATOR [+ info]
    SEALANT APPLICATOR

    SEALANT APPLICATOR

    This handy device is designed with the right amount of flexibility to provide a perfect final finish to a Timbabuild repair. The tapered and angled edges on one side, with a flat edge on the reverse gives smooth control. Sold in 100's boxed in bags of 10pcs.
     
  • Chemfix TIMBABUILD MIXING BOARD TIMBABUILD MIXING BOARD Light [+ info]
    TIMBABUILD MIXING BOARD

    TIMBABUILD MIXING BOARD

    Light
    An indispensable item for any Timbabuild user, this lightweight mixing board is made from PVC for a glossy non-stick finish. A lightweight 3mm PVC mixing board ergonomically curved for an excellent grip, to assist thorough and clean mixing of Timbabuild EHB60 or ERC10 resin systems. This wipe clean surface will not leave a residue after...
     
  • Chemfix PRODUCT DISPLAY STAND & VIDEO PRODUCT DISPLAY STAND & VIDEO Point of Sale [+ info]
    PRODUCT DISPLAY STAND & VIDEO

    PRODUCT DISPLAY STAND & VIDEO

    Point of Sale
    The perfect way to illustrate and promote Timbabuild at the point of sale. This product display stand for distributors has the added benefit of an LCD video screen displaying the use and applications of Timbabuild to potential customers. This 5 tier display stand contains the entire Timbabuild epoxy wood repair product range - Extrusion Tools, Timbabseal, EWS, ERC10 and EHB60 on the top level. The stand is illustrated with fully printed logos and...
     
  • Chemfix TIMBABUILD FINISH TIMBABUILD FINISH 2K - Light - Low VOC - Styrene free [+ info]
    TIMBABUILD FINISH

    TIMBABUILD FINISH

    2K - Light - Low VOC - Styrene free
    Timbabuild® FINISH manufactured by Chemfix, is designed to aid the
    perfect finished surface to Timbabuild repairs. Finish is a 2 Part filler in a
    patented silicone tube designed to perfectly mix the filler and hardener
    ratio without effort.
    Once mixed, this durable filling agent can be applied as a ‘top coat’ to any Timbabuild repair after sanding to smooth out any imperfections, pin holes or uneven layers.

    The mixed product is fast curing...
     
  • Point of Sale Products
  • Chemfix COUNTER TOP CARTRIDGE DISPLAY COUNTER TOP CARTRIDGE DISPLAY [+ info]
    COUNTER TOP CARTRIDGE DISPLAY

    COUNTER TOP CARTRIDGE DISPLAY

    Chemfix range of point of sale (POS) material and sales aids for use in store or for client visits, in plain or private label. An ideal way to make your product stand out from the shelf, and illustrate the power and uses of chemical anchoring.These lightweight displays are built from Perspex and specially made real life fixing models so that the user can look and touch. The built-in leaflet holder (option) further enhances the sales information...
     
  • Chemfix BRICK DEMO DISPLAY BRICK DEMO DISPLAY [+ info]
    BRICK DEMO DISPLAY

    BRICK DEMO DISPLAY

    Chemfix range of point of sale (POS) material and sales aids for use in store or for client visits, in plain or private label. This specially made lightweight (0.5kg) demonstration sample is an ideal way to illustrate chemical anchoring to clients.A threaded nut is included to allow any item to be attached to demonstrate specific fixing applications.
     
  • Chemfix COUNTER TOP PRE-MIX DISPLAY COUNTER TOP PRE-MIX DISPLAY [+ info]
    COUNTER TOP PRE-MIX DISPLAY

    COUNTER TOP PRE-MIX DISPLAY

    Chemfix range of point of sale (POS) material and sales aids for use in store or for client visits, in plain or private label. An ideal way to make your product stand out from the shelf, and illustrate the power and uses of Pre-Mix Wood Filler.A perspex unit with space for 2 cartidges which can be conveniently wall mounted to demonstrate the power and versatility of the Pre-Mix Two Part Wood Filler. Showing a range of repairs including edges, fixings and...
     
  • Battery/Pneumatic Extrusion Tools
  • Chemfix BATTERY EXTRUSION TOOLS BATTERY EXTRUSION TOOLS 7.4v Li-On Battery [+ info]
    BATTERY EXTRUSION TOOLS

    BATTERY EXTRUSION TOOLS

    7.4v Li-On Battery
    This range of lightweight battery extrusion tools is designed around the Chemfix cartridge range. The pistol design and battery are the same regardless of barrel shape/size. CHARACTERISTICS: • Extremely lightweight design.
    • Stepless speed control.
    • Built-in LED torch light.
    • 7.4v Battery interchangeable in all tool sizes.
    • "Non-drip" release function.  
  • Chemfix PNEUMATIC EXTRUSION TOOLS PNEUMATIC EXTRUSION TOOLS UK Manufactured [+ info]
    PNEUMATIC EXTRUSION TOOLS

    PNEUMATIC EXTRUSION TOOLS

    UK Manufactured
    Manufactured in the UK by a world leading specialist in extrusion tool products, this range of tools is custom made to suit the Chemfix cartridge. Driven by a standard Pneumatic air line for effortless extrusions. CHARACTERISTICS:

    • Lightweight 1.9kg*
    • Unlimited & smooth extrusions.
    • Perfect for where airlines can provide continuous extrusions.
    • Saves time and energy.
    • 2.2kN of...
     
  • Fixings
  • Chemfix CHEMICAL ANCHOR STUDS CHEMICAL ANCHOR STUDS [+ info]
    CHEMICAL ANCHOR STUDS

    CHEMICAL ANCHOR STUDS

    Chemfix studs and sockets are designed for use with Chemcap and Supercap glass capsules. They can also be used just as easily with our standard chemical anchor resin. Zinc plated 5.8 grade steel.CHARACTERISTICS: • Use in wet or dry concrete.
    • Cut-point centre tip.
    • For both standard or diamond drilled holes.
    • Carbon or stainless steel grades available.
    • Boxed in 6's or 10's to...
     
  • Chemfix CONCRETE SOCKETS CONCRETE SOCKETS [+ info]
    CONCRETE SOCKETS

    CONCRETE SOCKETS

    Chemfix Concrete Sockets are used with Chemcap and Supercap, besides standard chemical anchoring. Made from 5.8 grade steel with zinc coating, cut point for use with capsules.CHARACTERISTICS: • Use in wet or dry concrete.
    • Cut-point centre tip.
    • For both standard or diamond drilled holes.
    • Carbon or stainless steel grades available.
    • Boxed in 6's or 10's to...
     
  • Chemfix ASPHALT FIXING CHEMBOLT™ ASPHALT FIXING CHEMBOLT™ [+ info]
    ASPHALT FIXING CHEMBOLT™

    ASPHALT FIXING CHEMBOLT™

    CHEMFIX ASPHALT fixing system for use with chemical anchoring.
    A metal anchor bolt with an internal thread which is designed for removable fixings in asphalt, combined with a chemical anchor resin for high durability and ease of fixing.
    CHARACTERISTICS: • M12 or M10 internally threaded socket.
    • Designed for use in Asphalt or Tarmac.
    • Proven durability.
    • Imparts no stress to the surrounding area (unlike expansion anchors).  
  • Tension Testing Equipment
  • Chemfix MEDIUM DUTY KIT (25kN & 50kN) MEDIUM DUTY KIT (25kN & 50kN) [+ info]
    MEDIUM DUTY KIT (25kN & 50kN)

    MEDIUM DUTY KIT (25kN & 50kN)

    Professional Medium Duty Fixing Testers enable engineers to confirm the holding power of anchors in most construction materials, either for the purpose of establishing safe working loads or to validate the correct installation of existing fixings. The tensile load of up to 25kN or 50kN is applied to the fixing mechanically and hydraulics are used to register the load through an accurate analogue gauge, making the tester very reliable. Hydrajaws revolutionary...
     
  • Chemfix HEAVY DUTY KIT (145kN) HEAVY DUTY KIT (145kN) [+ info]
    HEAVY DUTY KIT (145kN)

    HEAVY DUTY KIT (145kN)

    The 145kN model 2008 tester has been designed to meet the demand for proof load testing of larger construction fixings. A lightweight triangular shape aluminium load spreading bridge has been designed specifically for the model 2008 tester and directs reaction loads away from the fixing, this combined with the tester weighs only...
     

 

We’d love to get to know you better.

The most important person at Chemfix is you. Tell us your concerns and we’ll be delighted to help.

Come and visit us Mill Street East, Dewsbury, West Yorkshire WF12 9BQ, UK  

Learn more +44 (0)1924 453886

  • Youtube
  • Google+
  • Twitter
  • Facebook
  • Linked In

Register for our Newsletter

Get all the latest news and new product information direct from Chemfix by email. Unquestionably the quickest way to get updated!